Zoom ZUAC2 USB 3.0 Audio Interface

The unit features two XLR/TRS combo inputs with microphone preamps and two balanced 1/4" outputs.

Expected availability: 6-9 business days
“Expected availability” is the estimated time to ship from the manufacturer to the Fusion Cine national distribution center. ETAs can sometimes vary depending on product availability.

The UAC-2 from Zoom is a 2x2 USB 3.0 audio interface that offers near zero latency and up to 24-bit/192 kHz resolution. The compact and robust housing makes the interface perfect for studio and field recording of microphones and instruments, for onstage playback and audio streaming, and with its dedicated MIDI input and output connectors, it can even serve as a stable MIDI interface.

The unit features two XLR/TRS combo inputs with microphone preamps and two balanced 1/4" outputs. Phantom power is available for use with condenser microphones. Additionally, input 1 and 2 offer a Hi-Z instrument input for guitars and bass. The headphone output has a dedicated volume control and a free Mac application is available for setting mix parameters and adding effects such as reverb and echo. The interface is bus powered, but may be powered by the optional AD-14 power adapter.

  • 2-in/2-out USB 3.0 High-Speed audio interface
  • Support for recording and playback up to 24-bit/192 kHz
  • Ultra-low latency audio streaming (2.2ms roundtrip @ 96 kHz / 32 samples)
  • Two combo balanced XLR/TRS input connectors accept both mic and line-level signal
  • Hi-Z switches allow direct connection of electric guitar or bass
  • Switchable +48V phantom power
  • Two balanced TRS output jacks for connection to amplifiers or self-powered speakers
  • 1/4" headphone jack with dedicated level control
  • Independent gain controls and clip LEDs for each input
  • Large knob output volume control
  • Direct Monitoring switch for zero latency monitoring in mono or stereo
  • MIDI In and Out
  • Compatible with all popular DAW software, including Cubase, Logic, Garage Band, Pro Tools, Ableton Live, and others
  • High-performance mic preamps with up to +60dB of amplification
  • 120dB of dynamic range
  • 4x upsampling during A/D and D/A conversion for reduced noise and enhanced fidelity
  • Asynchronous transfer system unaffected by computer jitter
  • Bus powered-no AC power required
  • Robust metal housing ensures roadworthiness
  • Works with all USB 2.0 and 3.0-equipped computers and iPads
General SpecificationsDetails
Connections Input 1/2: 2 x Combo XLR/1/4" / 6.35 mm TRS
(XLR: 2 hot, TRS: Tip hot)
Instrument (Input 1 & 2): 2 x 1/4" / 6.35 mm TRS
(disables Input 1 & 2 when in use)
Output L/R: 2 x 1/4" / 6.35 mm TRS (balanced)
Phones: 1 x 1/4" / 6.35 mm TRS stereo phone
Input Gain 0 to 60 dB (1 dB steps)
Input Impedance XLR/TRS: 5 kOhms
Instrument (Hi-Z On): 1 MOhm
Maximum Input Level +12 dBu (@ 0 dBFS)
Phantom Power +48 V
Maximum Output Level TRS Output: +14 dBu at 0 dBFS
Phones: +8 dBu at 0 dBFS
Output Impedance TRS Output: 100 ohms
Phones: 30 ohms
Headphone Output Power 20 mW + 20 mW (into 32 ohm load)
Frequency Response -1.0 dB: 20 Hz to 60 kHz @ 192 kHz setting
-1.0 dB: 20 Hz to 40 kHz @ 96 kHz setting
-1.0 dB: 20 Hz to 20 kHz @ 44.1 kHz setting
Signal to Noise Ratio (SNR) 125 dB(IHF-A) @ 60 dB, 150 ohm input
Dynamic Range A/D: 118 dB typical (IHF-A)
D/A: 120 dB typical (IHF-A)
Channels of I/O Audio Channels Recording: 2
Audio Channels Playback: 2
Sampling Frequencies System: 192, 176.4, 96, 88.2, 48, 44.1 kHz
Bit Depth 24-bit
Interface USB 3.0 / 2.0
MIDI In / Out (5-pin DIN jacks)
Power USB Bus Power
Optional AC Adapter: 5 VDC, 1 A (AD-14)
Power Consumption: 5 W
Dimensions (D x W x H) 4.5 x 6.9 x 1.8" / 11.4 x 17.6 x 4.6 cm
Weight 1.65 lb / 0.75 kg

What's Included

  • Zoom UAC-2 USB 3.0 Audio Interface
  • USB 3.0 Cable
  • Steinberg Cubase LE Software Authorization Code

Write Your Own Review
You're reviewing:Zoom ZUAC2 USB 3.0 Audio Interface
Your Rating