Zoom ZTAC2R - Thunderbolt Audio Interface

The compact and robust housing makes the interface perfect for studio and field recording of microphones and instruments, for onstage playback.

Expected availability: 6-9 business days
“Expected availability” is the estimated time to ship from the manufacturer to the Fusion Cine national distribution center. ETAs can sometimes vary depending on product availability.
SKU
ZTAC2R

The TAC-2R from Zoom is a two-channel Thunderbolt audio interface that offers near zero latency and up to 24-bit/192 kHz resolution. The compact and robust housing makes the interface perfect for studio and field recording of microphones and instruments, for onstage playback, and audio streaming, and with its dedicated MIDI input and output connectors, it can even serve as a stable MIDI interface.

The unit features dual XLR/TRS combo inputs to the preamplifiers and two balanced 1/4" outputs. Phantom power is available for use with condenser microphones and the interface is bus powered, so no AC adapter is required. The headphone output has a dedicated volume control and a free Mac application is available for setting mix parameters and adding effects such as reverb and echo.

  • Two input/two output Thunderbolt audio interface
  • Record and playback with up to 24-bit/192 kHz resolution
  • Ultra-low latency audio streaming
  • Two combo balanced XLR/TRS input connectors accept both microphone and line-level signal
  • Dual microphone preamps with +60 dB of gain
  • Independent gain controls and clip LEDs for each input
  • Hi-Z switches allow direct connection of electric guitar or bass
  • Switchable +48V phantom power
  • Two balanced TRS output jacks for connection to amplifiers or self-powered speakers
  • Large knob output volume control
  • 1/4" TRS headphone jack with dedicated level control
  • Direct Monitoring switch for zero latency monitoring in mono or stereo
  • MIDI In and Out
  • 4x up-sampling during A/D and D/A conversion for reduced noise and enhanced fidelity
  • Asynchronous transfer system unaffected by computer jitter
  • Bus powered - no AC power required
  • Robust metal housing ensures road worthiness
  • Compatible with all Thunderbolt-equipped Macintosh computers running OS X 10.8.5 or later
  • TAC-2 MixEfx is a free Mac application for setting mix parameters and adding effects such as reverb and echo, with other features including a low cut filter, phase reverse, and auto gain control for each input
General SpecificationsDetails
Interface Thunderbolt
Converters Bit Depth
24-bit
Sampling Rates
44.1, 48, 88.2, 96, 176.4 and 192 kHz
Audio Channels I/O
2
Inputs Connectors
2 x XLR/TRS combo
Gain
0 to 60 dB (1 dB steps)
Input Impedance
5 kohm
Hi-Z: 1 Mohm
Maximum Input Level
+12 dBu @ 0 dBFS
Outputs Connectors
2 x 1/4" TRS
Output Impedance
100 ohm
Maximum Output Level
+14 dBu @ 0 dBFS
Headphones Connectors
1 x 1/4" TRS
Output Impedance
30 ohm
Maximum Output Level
+8 dBu @ 0 dBFS
Power
20 mW + 20 mW (into 32 ohm load)
MIDI 2 x 5-pin DIN Input/Output
Phantom Power 48V (global)
Dynamic Range A/D: 118 dB typical (IHF-A)
D/A: 120 dB typical (IHF-A)
Frequency Response 20 Hz to 20 kHz, -1.0 dB @ 44.1 kHz
20 Hz to 40 kHz, -1.0 dB @ 96 kHz
20 Hz to 60 kHz, -1.0 dB @ 192 kHz
SNR EIN: 125 dB(IHF-A) @ 60 dB, 150 ohm input
Power Requirements Bus powered
Consumption: 10 W maximum
Dimensions (WxHxD) 7.0 x 4.5 x 1.8" (176 x 114 x 46 mm)
Weight 1.6 lb (0.7 kg)

What's Included

  • Zoom TAC-2R - Thunderbolt Audio Interface
  • Thunderbolt Cable

Write Your Own Review
You're reviewing:Zoom ZTAC2R - Thunderbolt Audio Interface
Your Rating