Zacuto Z-ZWP2 Zwiss Plate V2
The Zacuto Zwiss Plate V2 is an accessory mounting plate (cheese plate) that mounts to LWS 15mm rods.
The Zacuto Zwiss Plate V2 is an accessory mounting plate (cheese plate) that mounts to LWS 15mm rods. Designed to make adding accessories simple, easy and secure it features 1/4"-20 and 3/8"-16 threaded mounting holes and pre-labeled mounting holes for a variety of available battery plates, on board recorders and wireless systems. There are two mounting holes on each side of the plate that are designed for use with the Zacuto Wireless Plate Pro. The Zwiss Plate V2 is machined from a single piece of aluminum for strength and stability.
The Zwiss Plate V2 incorporates four 15mm rod clamps, two sets of two clamps with 60 mm spacing, one set at each end. This allows you to mount the plate in a vertical position, and still have two 15mm rod clamps available for more accessory mounting options. The rod clamps feature spring-loaded ratcheting levers so they can be tightened or loosened even if they are unable to rotate a full 360
|Material of Construction||Anodized aluminum|
|Attachment Method||13 x 1/4"-20 threaded holes|
5 x 3/8"-16 threaded holes
Note: these are in addition to the accessory holes that are labeled for accessory devices.
|Dimension (L x W x Thickness)||7.75 x 3.88 x 0.38" (19.7 x 9.9 x 0.97 cm)|
|Weight||Approximately 1 lb (0.45 kg)|
- Zwiss Plate V2
- Captive 1/4"-20 Tie Down Screw
- 2x Phillips Head Mounting Screws for the Jet Pack
- 4x Flat Head Phillips Mounting Screws for the AJA Ki Pro
- 4x Phillips Head Mounting Screws for the Anton Bauer QRC Digital Plate
- 4x Phillips Head Mounting Screws for V-Mount Plate