Zacuto Z-HZWP2 Horizontal Zwiss Plate V2

The Zacuto Horizontal Zwiss Plate V2 is an accessory mounting cheese plate that mounts to LWS 15mm rods.

Expected availability: 5-8 business days
“Expected availability” is the estimated time to ship from the manufacturer to the Fusion Cine national distribution center. ETAs can sometimes vary depending on product availability.
SKU
Z-HZWP2

The Zacuto Horizontal Zwiss Plate V2 is an accessory mounting cheese plate that mounts to LWS 15mm rods. Featuring a standard Zwiss Plate V2, the Horizontal Zwiss Plate V2 adds a Zacuto MiniMount for horizontal mounting on your 15mm rod system. This keeps the camera-profile low, making it more suited for tripod use.

Designed to make adding accessories simple, easy and secure, the Horizontal Zwiss Plate V2 features 1/4"-20 and 3/8"-16 threaded mounting holes and pre-labeled mounting holes for a variety of available battery plates, on board recorders and wireless systems. There are two mounting holes on each side of the plate that are designed for use with the Zacuto Wireless Plate Pro. The Horizontal Zwiss Plate V2 is machined from a single piece of aluminum for strength and stability.

The Horizontal Zwiss Plate V2 incorporates four 15mm rod clamps, two sets of two clamps with 60 mm spacing, one set at each end. This allows you to add rods, articulating arms, or other accessories as needed. The rod clamps feature spring-loaded ratcheting levers so they can be tightened or loosened even if they are unable to rotate a full 360

General SpecificationsDetails
Material of ConstructionAnodized aluminum
Attachment Method 13 x 1/4"-20 threaded holes
5 x 3/8"-16 threaded holes (One is on Zacuto MiniMount)

Labeled holes for the following devices:
WP - Zacuto Wireless Plates
AJA - AJA Ki Pro Mini Recorder
CDX - Codex Onboard S 4K Recorder
QRD - Anton Bauer QRC Digital Battery Plate
VMT - Switronix V-Mount Battery Plate
QR - Anton Bauer QR GOLD Battery Plate
QRC - Anton Bauer QRC GOLD Battery Plate
JTP - Switonix Jetpack Battery Plates
VCT - Vext V-Mount Battery Plate
Dimension (L x W x Thickness)With Mini Mount: 7.75 x 3.88 x 1.50" (19.68 x 9.85 x 3.81 cm)
Without Mini Mount: 7.75 x 3.88 x 0.38" (19.68 x 9.85 x 0.97 cm)
Weight1.30 lb (0.59 kg)

What's Included

  • Zwiss Plate V2
  • Mini Mount for 15mm Rods
  • 2 x 10-32 Allen Screws for Attaching MiniMount
  • Captive 1/4"-20 Tie Down Screw
  • 2x Phillips Head Mounting Screws for the Jet Pack
  • 4x Flat Head Phillips Mounting Screws for the AJA Ki Pro
  • 4x Phillips Head Mounting Screws for the Anton Bauer QRC Digital Plate
  • 4x Phillips Head Mounting Screws for V-Mount Plate

Write Your Own Review
You're reviewing:Zacuto Z-HZWP2 Horizontal Zwiss Plate V2
Your Rating