Teradek Bolt 1000 for Sony Venice 3G-SDI/HDMI Wireless TX

The Teradek Bolt 1000 for Sony Venice is Teradek’s latest wireless video module designed for seamless integration with cinema cameras. The module mounts directly to the rear of the Sony VENICE and offers a streamlined solution for integrating high-performance wireless video without extraneous cables. Not a single arm or cable needed for any of this. It’s available in 500, 1000, and 3000 ft. ranges and is now shipping. Everyone who owns a VENICE should have the new Bolt in their kit.

Pre-order
SKU
TRD-10-1969
Qty
CAD $4,264.99

The Teradek Bolt 1000 for Sony Venice is Teradek’s latest wireless video module designed for seamless integration with cinema cameras. The module mounts directly to the rear of the Sony VENICE and offers a streamlined solution for integrating high-performance wireless video without extraneous cables. Not a single arm or cable needed for any of this. It’s available in 500, 1000, and 3000 ft. ranges and is now shipping. Everyone who owns a VENICE should have the new Bolt in their kit.

Bolt for Sony VENICE is compatible with the Bolt XT, Bolt LT, 703 Bolt, FOCUS Bolt RX, Cine 7 RX, and all third-generation Bolt systems. The module passes data, audio, and video via the camera’s rear 144-pin connector, eliminating clunky power and video cables while ensuring data path integrity from the camera to other accessories such as the AXS-R7 recording module. To save power, the device can be switched off without interrupting the signal path going through to the recorder module. The device also powers on & off automatically with the VENICE camera.

 Like Teradek’s high-end Bolt XT line, the Bolt for Sony VENICE can multicast to up to 4 receivers and works with Teradek’s proprietary software utilities on supported Bolt receivers. Enjoy features like manual frequency selection, 3D LUT engine, and a 5GHz spectrum analyzer to keep an eye on interference on set.

 “We’re on a major production shooting with a Sony VENICE and the new Bolt has been instrumental to our setup. Since it connects directly to the back of the camera, we didn’t have to mount it or plug any cables in. It keeps our camera super clean so we can easily move around on set and still get top-notch wireless monitoring to video village.” - Khalid Mohtaseb, Director of Photography.

Teradek Bolt for Sony VENICE highlights:

  • Attaches seamlessly to the Sony VENICE cameras, with pass-through power and video for a cable-free setup.
  • Zero-delay 1080p60 wireless video.
  • Up to 1000 ft. of range.
  • Compatible with Bolt XT & LT receivers of the same range.
  • Compatible with Sidekick II and integrated SmallHD monitors.

Clean Mounting

Modules pass-through data, audio and video via the camera’s rear 144-pin connector, eliminating clunky power and video cables while ensuring data path integrity from the camera to other accessories such as the AXS-R7 recording module.

Compatibility

Bolt 1000 for Sony VENICE is compatible with all Bolt 1000, LT & XT models, Sidekick II, and integrated SmallHD Bolt monitors.

Receivers

Send video from the transmitter to up to 4 receivers within 1000 ft.

Software Features

Take advantage of Bolt’s powerful software features including 5GHz spectrum analyzer, manual channel selection (available on Bolt 1000 & 3000 models), 3D LUT engine, and much more.*

*Software features are activated on Bolt receiver units.

Video

Video Inputs Sony Venice connector
Video Outputs none
Sdi Ancillary Data Support metadata, timecode, and start/stop flags
Color Sampling RGB 4:4:4, 8-bit
Delay Tx To Rx 0.001sec
Supported Resolutions 1080p23.98/24/25/29.97/30/50/59.94/60
720p50/59.94/60
Video Compression Visually Lossless
Audio Compression 48kHz 24-bit PCM

Input

Audio Input Embedded Audio Input

Physical

Dimensions 106.71mm x 63.68mm x 20.54mm
Weight 226g (8 Oz)
Construction Milled aluminum chassis and regulation-compliant PCB
Mountability Mounts directly to Sony Venice Brain

Interfaces

Configuration Interfaces None
Switches On/Off and Pairing button
Desktop App Feature-rich Bolt Manager
application for OSX ∓
Windows Usb Interface Functionality Upgrade via Mini-USB

Network

Antennas 2 External 2dBi antennas (included)
Wireless Non-DFS Frequencies: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
DFS Frequencies:
5.27 ~ 5.31 GHz
Rf Channel Selection Auto and Configurable Channel selection
Encryption AES-128
Rf Power up to 17 dBm
Range Up to 1000 ft line of sight
Unicast Multicast one transmitter connects to up to 4 receivers
Noise Rejection Coexists with WiFi and 5GHz cordless phones
Operates up to 3 sets in same location

Power

Power Input Sony Venice connector
Battery None
Nominal Power Consumption up to 10W

  • 1 x Bolt 1000 for Sony Venice
  • 1 x Hex L Key 2.5 mm size 3-5/8" length
  • 1 x Mini-USB (5pin) to USB - 18in/45cm Cable [11-1267]
  • 2 x Antenna 2dBi WiFI 2.4/5.8 GHz
  • 1 x quickstart guide