SmallHD Focus 7 BOLT 500 RX
With a highly visible display and built-in Teradek receiver, SmallHD Focus 7 BOLT 500 RX monitor adds real-time confidence for directors, while eliminating unnecessary cables and clutter.
With a highly visible display and built-in Teradek receiver, SmallHD Focus 7 BOLT 500 RX monitor adds real-time confidence for directors while eliminating unnecessary cables and clutter. The FOCUS 7 Bolt’s touchscreen controls takes the hassle out of the wireless pairing. Easily pair the 7-inch monitor/receiver to a FOCUS Bolt 500 TX or Teradek Bolt 500 transmitter and enjoy exceptional HD wireless video with no perceptible delay.
It features 1920 x 1200 10-bit 1000 nits of brightness and SmallHD OS3 with lots of new features. It can receive the signal from Teradek Bolt 500 transmitters and SmallHD transmitter/monitors at distances of up to 500-feet (line-of-sight).
The SmallHD FOCUS 7 Bolt features a 7.0″ (17.8 cm) IPS touchscreen with 1000 cd/m2 (nits) brightness. The resolution is 1920 x 1200 which results in 323 PPI (pixel-per-inch) density. Thanks to 10-bit color processing it displays a color gamut of 75% DCI-P3. The monitor also provides a wide 160° viewing angle both horizontally and vertically.
The FOCUS 7 Bolt 500 RX is designed to receive wireless video from Teradek Bolt 500 transmitters and SmallHD transmitter/monitors at distances up to 500-feet line-of-sight. All SmallHD wireless monitors effortlessly pair when both the RX and TX are set to pairing mode in the wireless settings menus. Transmission from a SmallHD TX monitor/transmitter or Teradek transmitter can multicast to up to four FOCUS Bolt 500 RX’s simultaneously. The FOCUS 7 Bolt 500 RX can also function as an on-camera monitor, but it only has an HDMI video input.
The included rubberized handgrips and neck strap enable you to comfortably carry the combo unit around the set. An L-series type battery kit, cable clips, matte and glossy screen protectors, and cleaning cloth are also included. Designed with professional monitoring tools, the SmallHD FOCUS 7" On-Camera Monitor is bright, lightweight, and features a sharp 323 ppi display. The 1000 cd/m² bright touchscreen 1920 x 1200 IPS LCD panel is daylight-viewable and supports up to UHD 4K video via its micro-HDMI input. Using the intuitive Swipe OS, you can turn on and save pages of various monitoring tools and focusing aids with a tap.
At the rear of the monitor, a dual NP-F battery bay enables you to hot-swap L-series batteries with only one required to power the unit. A 3.5mm barrel DC output can power select cameras with a separately available DC coupler, enabling you to extend your DSLR or mirrorless camera's runtime. A tilt arm is included for mounting the monitor via your camera's accessory shoe or on a 1/4"-20 screw.
- 7" 1920 x 1200 Touchscreen Display
- Built-In Teradek Wireless Video Receiver
- Transmits up to 1080p60 Video
- Up to 500' Wireless Working Distance
- Waveform / RGB Parade / Vectorscope
- 1000 cd/m² 10-Bit IPS LCD Panel
- Daylight-Viewable Display
- Dual, Hot-Swap L-Series Battery Plate
- 160° Viewing Angle
- 1 x Full-Size HDMI Input
SmallHD Focus 7
|Delay||< 1 ms (0.001 sec)|
|Supported Video Resolutions||1080p: 60/59.94/50/30/29.97/24/23.98
|Audio Compression||48 kHz, 24-Bit PCM|
|WiFi Frequency||5 GHz|
|RF Channel Selection||AFS (Automatic Frequency Selection)|
|RF Power||20 dBm EIRP|
|Maximum Transmission Distance||500' / 152.4 m (Line-of-Sight)|
|Package Weight||4.365 lb|
|Box Dimensions (LxWxH)||9.6 x 7.1 x 4.7"|
- SmallHD FOCUS 7 Daylight-Viewable 7" Monitor with Bolt 500 Receiver
- Sony NPF L-Series Battery & Charger
- Cable Clips (Set of 4)
- Monitor Handles and Neck Strap
- Matte Screen Protector for FOCUS 7 Monitor
- Clear Screen Protector for FOCUS 7 Monitor
- Micro-HDMI Male to HDMI Type-A Female Adapter Cable (8")
- Microfiber Cleaning Cloth
- Limited 1-Year Warranty